Replacement Zipper

Zipper Repair-Slider (#5)

This set does not include repair tools

Only applicable to,5# Plastic zipper, 5# Coil zipper, 5# Metal zipper.

All sliders are made of high-quality metal, and every process is strictly controlled. Each slider is carefully selected

After repeated testing, our slider can do:

1. Self-locking function, the zipper will be locked when closed, and will not open automatically if you don't pull the zipper, avoiding a lot of embarrassment.
2. It can be hand-washed and machine-washed, and will not peel off and rust for a long time (except for chemical pollution and violent damage)
3. The pull tab is thickened, and it is not easy to bend and break without tools (except for Hercules)

How to install the zipper replacement

OPEN ENDED ZIPPER :You can use this type of zippers on jackets, construction clothing, coats, sweatshirts, hoodies, vests.

Replacement is very simple

1. Remove top stop, remove the old slider
2. Install new slider and top stop

CLOSED ENDED ZIPPER:Those zippers that do not separate at the bottom,commonly found on tents,backpacks,bags.

1. Cut a small opening from the end of the tape, remove some teeth
2. Remove the old slider from the gap
3. Install a new slider from the gap in the tape, paying attention to the direction that the two holes of the slider are facing upwards
4. Use a needle to sew the gap of the tape and install the Bottom stop

Please move the slider up and down to test the function after completing the above operations, polish the zipper teeth with wax or spray to make the zipper smoother and easier to move