Marker-generator


Posted on Nov 7, 2012

The oscillator section uses three sections of a 7400 quad NAND gate integrated circuit. The 1-MHz signal from the oscillator is fed into a 7 490 decade counter configured to divide by ten, providing the 100kHz signal. To obtain the 50 and 25kHz outputs, the 100-kHz signal is further divided by 7473 dual J-K flip-flop. The first half of the 74 73 divides the 100-kHz signal by two, yielding the 50 kHz signal. The second half of the 7473 again divides by two, giving the 25kHz signal. S2 selects the output, a square wave, rich in harmonics.


Marker-generator
Click here to download the full size of the above Circuit.

The generator can be powered from any convenient 6 to 12 Vdc source. A 7805 fixedvoltage regulator supplies the regulated voltage for the oscillator and the divider chips. The generator described here is powered by a 9-V transistor radio battery.




Leave Comment

characters left:

New Circuits

.

 


Popular Circuits

FET Voltage Regulator
water level indicator using 7 segment display
voltage Calculating current in a simple circuit
10 amp 138 volt power supply circuits
0-44dB RF Attenuator circuit with RF 2420
Automotive Buses and Vehicle Bus Description
Audio Voice-Over Circuit



Top